pharmaceutical-teflon-lead-wires

CEPC RTD’s & Thermocouples with Teflon Lead Wire


One of the more commonly used types in the sanitary industry this probe can be supplied in any immersion length and a number of different mating connections. The element conductors terminate inside an epoxy sealed transition housing to TEFLON insulated and jacketed stranded lead wires. The nylon cord grip provides additional strain relief.

Process Connection: CIP caps or bevel seats
Calibration: 100 OHM platinum RTD or any Base Metal Thermocouple
Probe Diameter: .25″
Lead Wire: Teflon
Instrument Connection: Quick-coupling connector, XLR connector or bare ends


pharmaceutical-connection-head

CEPC RTD’s & Thermocouples with Connection Head


Termination to an FDA approved polypropylene, NEMA-4 aluminum or NEMA-4X stainless steel connection head this construction provides for additional protection in a more industrial environment. Heads are equipped with a screw cover cap with captive stainless steel chain to prevent loss. Brass terminal posts on a ceramic base provides simple wiring to the control panel via the conduit opening.

Process Connection: CIP caps or bevel seats
Calibration: 100 OHM platinum RTD or any Base Metal Thermocouple
Probe Diameter: .25″
Connection Head: White Polypropylene, Aluminum, or Stainless Steel


pharmaceutical-rtd-thermowell

CEPC RTD’s & Thermocouples with Head, Thermowell


Complete with connection head, sensor and reduce tip type well for faster response time this type of construction provides additional protection in a more industrial location. The sensor is terminated with a DIN style spring loaded integral terminal block allowing convenient removal for inspection or replacement.

Process Connection: CIP caps or bevel seats
Calibration: 100 OHM platinum RTD or any Base Metal Thermocouple
Probe Diameter: .25″
Well: Reduce Tip
Connection Head: White Polypropylene, Aluminum, or Stainless Steel


pharmaceutical-tc-thermowell

CEPC RTD’s & Thermocouples with Head, Thermowell


Complete with connection head, sensor and well this type of construction provides additional protection in a more industrial location. The sensor is terminated with DIN style spring loaded integral terminal block for convenient removal for inspection or replacement.

Process Connection: CIP caps or bevel seats
Calibration: 100 OHM platinum RTD or any Base Metal Thermocouple
Probe Diameter: .25″
Well: Straight Shank
Connection Head: White Polypropylene, Aluminum, or Stainless Steel


pharmaceutical-system-replacement

Building Management System Replacement


Ideal for monitoring cooling and heating systems in buildings. These easy to install probes can be fabricated to any desired immersion and lead length. Optional bell spring provides strain relief when pulling wires through conduit. Leads are terminated to skin ends or a choice of connectors.

Process Connection: Direct Immersion
Calibration: 100 OHM platinum RTD or any Base Metal Thermocouple
Probe Diameter: .125″, .187″, or .25″
Lead Wire: Teflon

pdf-icon

pharmaceutical-sensor-transmitter

L.I.S.T II Linear Integrated Sensor Transmitter


The L.I.S.T II transmitter combines the stability and accuracy of an RTD with the benefits of an integral 4 to 20 mA signal condition device. This device can be installed directly into the process or existing thermowell and secured with standard compression fittings. Completely self contained the lead wire can be ordered in any length to provide output signal and voltage power source from the control panel.

Process Connection: Direct Immersion
Calibration: 100 OHM platinum RTD, with 4 To 20mA Output
Probe Diameter: .187″ or .25″
Lead Wire: Teflon


pharmaceutical-field-programmable

L.I.S.T II with CIP & Head Field Programmable


The L.I.S.T II transmitter combines the stability and accuracy of an RTD with the benefits of an integral 4 to 20 mA signal condition device. Termination to an FDA approved polypropylene, NEMA-4 aluminum or NEMA-4X stainless steel connection head this construction provides for additional protection in a more industrial environment The transmitter is safely contained in the nipple housing. Heads are equipped with a screw cover cap with captive stainless steel chain to prevent loss. Terminal block provides wiring for output signal and voltage power source.

Process Connection: CIP Tri-Clamp Cap
Calibration: 100 OHM platinum RTD, with 4 To 20mA Output
Probe Diameter: .187″ or .25″
Connection Head: White Polypropylene, Aluminum, or Stainless Steel

pdf-icon

pharmaceutical-16amp-clamp

CIP Thermowells 16AMP Clamp Connection


Bored through solid bar stock well connects to matching line size with clamp for a clean-in-place seal. The 1/2″NPT threaded opening allows for insertion of element with mating compression fitting or nipple extension. The step down tip allows for faster sensor response time.

Process Connection: 16AMP Clamp
Size: 1/2″ to 3″
Material: 316/316 Low Carbon Stainless Steel
Profile: Straight or Step Down

pdf-icon

pharmaceutical-16a-clamp-connection

CIP 16A1-141 & 16AQ-14 Clamp Connection


Bored through solid bar stock well connects to matching line size with clamp for a clean-in-place seal. The 1/2″NPT threaded opening allows for insertion of element with mating compression fitting or nipple extension. The step down tip allows for faster sensor response time.

Process Connection: 16A1-141 & 16AQ-14 Clamp
Size: 1/2″ to 3″
Material: 316/316 Low Carbon Stainless Steel
Profile: Straight or Step Down

pdf-icon